Cylinder Lifting Clamp
Cylinder Lifting Clamps (CLC) are designed to lift and hold hydraulic jack cylinders safely during construction. Constructed of formed steel bar for light weight and easy handling. These clamps are equipped with shackles for lifting and tensioning bolts for applying pressure around cylinder pipe.
Piston Clamp / Wrench
Piston Clamp / Wrenches are designed to safely lift, hold, and tighten pistons during construction. The welded steel construction with replaceable tension pads and tensioning bolts for applying equal pressure around piston ensures higher griping force than wood clamps. Each clamp has a maximum rated load of 1950 lbs.
Model PCW-24 is designed for lifting from the handles. The handles on this model are not removable.
Models PCW-47 and PCW-712 have been designed for lifting from shackles that are supplied with the units. These models are equipped with removable handles for a more compact design during storage.
Custom sizes are available. Contact EECO for more details.
Note: To ensure safe lifting, holding and tightening, the piston and tension pads must be clean, dry and free of oil and grease. Also Piston Clamp / Wrench must be properly tightened around the piston.
(DURING LIFTING DO NOT ACCELERATE OR STOP QUICKLY)
PVC Lifting Clamp
PVC Lifting Clamps are designed to lift and hold flush joint PVC pipe safely. Constructed of formed and welded 1/4" steel plate for light weight and easy handling these clamps are equipped with two holding tabs and shackles for lifting. A tee bolt tensioner is used to apply pressure around PVC pipe with cupped set screws for gripping. The maximum rated load for the PVC Lifting Clamps is 3000 lbs.
Note: To ensure safe lifting and holding, the clamp must be properly tightened around PVC pipe by adjusting the cupped set screws.
Telescopic Cylinder Lifting Clamp
Telescopic Lifting Clamp Assemblies (TLC) are specifically designed to lift EECO Telescopic Jacks, and are to be mounted on the cylinder under the lower head. These clamps are designed to lift and hold hydraulic jack cylinders safely during construction. Constructed of formed steel bar for light weight and easy handling. These clamps are equipped with shackles for lifting and tensioning bolts for applying pressure around cylinder pipe. The maximum rated load for the Telescopic Cylinder Lifting Clamp is 2,000 lbs.