Empty

Total: $0.00
Contact Us: 888-577-3326

Elevator Limit Switches

Log In or Request an Account to see pricing and options.

Elevator Limit Switches

Elevator Equipment Corp. provides three types of Elevator Limit Switches. The LS-1B Limit Switch is designed primarily for use in elevator hoistways as Access, Slow Down, Normal, and Final Limits. The Permanent Magnet Switch (MV) is designed primarily for applications requiring trouble free service. The Permanent Magnet Inductor Switch (LDS-3004A) is intended for use on hydraulic and electric elevators with speeds up to 400 feet per minute and one floor run control.

LS-1B Elevator Limit Switch

The LS-1B Elevator Limit Switch is designed primarily for use in elevator hoistways as Access, Slow Down, Normal, and Final Limits. The light weight durable construction of the LS-1B switch results in a reduced noise level and is designed for extended reliability.

Download Files: 

Magnetic Elevator Limit Switches

The Permanent Magnet Switch (MV) is designed primarily for applications requiring trouble free service. This switch provides a cost effective and simple solution for environments where mechanical contact between the actuating vane and switch is not desired.
Switches are available in two configurations, SPDT with one normally open & one normally closed contacts and DPDT with two normally open & two normally closed contacts.

Download Files: 

Inductor Limit Switch

The Permanent Magnet Inductor Switch (LDS-3004A) is intended for use on hydraulic and electric elevators with speeds up to 400 feet per minute and one floor run control. The LDS-3004A is made to interface with either relay logic, micro-processor or programmable logic controllers. The horseshoe shaped inductor switch provides noiseless sensing of slowdown and landing positions of the elevator.
The LDS-3004A Inductor Switch features solid metal construction and uses both a normally open and a normally closed contact reed switch as standard.

Download Files: 

Hoistway Switch Mounting Bracket Kit

Mounting brackets and Clamp are available for mounting the LS-1B & MV-4C model switches to the rail. Brackets are designed to work with 8, 12, & 15 pound rails. Part# 9733A. Contains one mounting bracket, two clips, and two bolts. Available as individual kits or in a case of 25.